Green Notes

In datacenters, there is a tendency to overexert and do too much if that makes sense. After all we want to make sure that everything is working well and beyond to avoid problems during uptime. Over provisioning and over allocation often lead to overspending in terms of indulgence in excess power and hardware. Apart from virtualization, increasing storage efficiency and equipment efficiency, Power capping is a new technology that datacenters are looking into right now to address this issue. The concept is logical enough as the name suggests. Power capping sets a cap on the power a server can consume at a given time without always leaving allowances for “in case of maximum load or maximum utilization” and is uniformly applicable for all servers.

Servers come in all shapes, sizes and uses. There are many scenarios that determine their usage like customer requirements and nature of work. So they do not all run to full capacity at all times and some maybe even never as many datacenters choose to not deploy their entire arsenal at the same time. So why do we allocate all this power to them without discerning? Why do we set a standard uniform allocation irrespective of functionality? Also more times than not, the suggested power allocation referred to on hardware pieces are much more than is actually needed. Again everyone is trying to be on the safe side and being careful about not interfering with the performance level, but unwittingly wasting more resources in the bargain. That is why power capping makes a whole lot of sense. Without overstepping the power limit, it allows us to save on space and increase your server density by ascertaining that your servers do not use more than their allocated power at once.

Even though many IT managers are hesitant to experiment lest important applications get interrupted, power has proven to be such an expensive and environmentally unfriendly commodity that many datacenters have decided to take their chances on it .Companies like Intel, IBM, Dell and AMD have released power capping management software to facilitate the process. For example Intel’s Dynamic Power Node Manager Technology along with ancillary management software helps servers running on Xeon 5500 chips to vary platform power on a case by case basis without reducing the performance level through monitoring and assessing real-time data of a server platform. The ceiling on the platform power is thus adjusted to your optimal individual power budget . In case it figures that the budget cannot be met with without interfering with the performance, it will alert you on your choices. Intel also has developed a software addition to the Node Manager called Intel Datacenter Manager, designed to monitor and control power for a group of servers.

Baidu, China’s largest search company has reported success recently using Intel’s power-capping technology. In fact the companies released a study that stated that a datacenter using this technology could save up to 40 watts per system without performance impact translating into as much as 20 percent additional datacenter capacity within the same rack-level power envelope, and a potential rack-density improvement of 20 to 40 percent. Prior to investing in power capping technology, Baidu was leasing racks at a datacenter where the company sought to save money by cramming as many machines as possible into the fewest number of racks. Post Intel’s power capping tools, they were able to establish an optimal workload corresponding to maximum power reduction with least performance loss. Then they determined the approximate amount of power the servers needed to just idle. After narrowing down on the precise number of servers per rack , they successfully established a cap at the rack level bringing down the power consumption from 900W to 750W.

It is always better to understand the full implications of power capping before deciding if power capping technologies in full blast would be a viable option for your data center. A trial run before full scale operation is recommended to protect important applications. Please contact us at Green Rack Systems for further consultation.

So, is there a way of measuring the exact efficiency of a Data center, you may ask… Green Grid, an association of IT professionals committed to proposing ways to increase the efficiency of Data centers, have come up with a metric called PUE, Power Usage Effectiveness. It is derived from the following:

PUE=Total Facility Power/IT Equipment Power

Total facility power is the total power supplied to the data center in question and IT Equipment Power is the power used by the equipment dedicated to manage, process, store, or route data within the data center such as storage, and network equipment, KVM switches, monitors etc. An ideal PUE value would be a 1 indicating that all power supplied is absorbed solely for the IT equipment. According to Green Grid, most Data Centers have a PUE value of 3 or more. But with proper design a value of around 1.6 is achievable. A 2007 study conducted by analyst firm Gartner revealed that the intense power requirements needed to run and cool data centers account for almost a quarter of global carbon dioxide emissions from information and communications technology. It also identified the main causes of inefficiency as lack of floor space, a failure to house high-density servers, and increased power consumption and heat generation.

At Green Rack Systems, here’s how we address these issues. Our data centers use high density blade solutions and low power options to consolidate space. To reduce our power consumption we opt for high efficiency power supplies and low voltage processors. In addition, we go for passive cooling options whenever possible to reduce the massive cooling costs. We reduce heat further by using higher efficiency, low wattage CPUs. We even go a step further and provide an optional solar powered server co-location to lower dependency on fossil fuels. To make it even more environmentally friendly, we use only RoHS compliant components, which restricts the use of hazardous substances in electrical and electronic equipment and try to incorporate recycled materials as much as possible. At Green Rack, there are two things we care about above all else-One is the quality of our technology, which our R & D team works diligently to constantly upgrade and the second is our tireless customer support to make sure you are nothing less than 100 percent satisfied. For further information, please contact us at sales@GreenRackSystems.com / 408-213-8144 .